Chapter 4: BIOS
63
SATA1
SATA 1 Enable controller
Use this feature to enable or disable the onboard SATA controller supported by the Intel
PCH chip. The options are
Enabled
and Disabled.
SATA 1 LPM (Link Power Management)
When this item is set to Enabled, the SATA AHCI controller manages the power usage of
the SATA link. The controller will put the link in a low power mode during extended periods
of I/O inactivity and will return the link to an active state when I/O activity resumes. The
options are Enabled and
Disabled
.
SATA 1 SGPIO/LED
Use this feature to select the SATA LED or SGPIO LED. The options are SGPIO and
SATA
LED
.
I-SATA2 - I-SATA8
This following information is displayed for each SATA drive entry:
•
Device Information
•
Device Size
Enable/disable port
Use this feature to disable or enable the SATA port number. The options are
Enabled
and Disabled.
Spin up
When the value of an edge detect or the value of an image binary (pixel) of a device is
from 0 to 1, select Enabled to allow the PCH to start a COMRESET initialization sequence
on this device. The options are Enabled and
Disabled
.
Intel Server Platform Services
This feature displays the following ME information:
•
General ME Configuration
•
Operational Firmware Version
•
ME Firmware Type
