Supermicro SuperServer 5038MR-H8TRF, Руководство пользователя

Страница: 82 / 133

Chapter 6: Advanced Chassis Setup
6-11
6-9 Power Supply
The 5038MR-H8TRF has a 1620 watt redundant hot-plug power supply consisting
of two power modules. Each power supply module has an auto-switching capability,
which enables it to automatically sense and operate at a 100V - 240V input voltage.
An amber light will be illuminated on the power supply when the power is turned
off. A green light indicates that the power supply is operating.
Replacing a Power Supply Module
If either of the two power supply modules fail, the other module will take the full
load and allow the system to continue operation without interruption. The Power
Fail LED will illuminate and remain on until the failed unit has been replaced.
Replacement units can be ordered directly from Supermicro. The power supply
units have a hot-plug capability, meaning you can replace the failed unit without
powering down the system.
Replacement power supply units may be ordered directly from Supermicro or
certified distributors.