Supermicro SuperServer 5037C-i, Руководство пользователя

Страница: 15 / 88

Chapter 2: System Setup
2-1
Chapter 2
System Setup
2-1 Overview
This chapter provides a quick setup checklist to get your SuperServer 5037C-i up
and running. Following the steps in the order given should enable you to have the
system operational within a minimal amount of time. If your system is not already
fully integrated with a motherboard, processor, system memory etc., please turn
to the chapter or section noted in each step for details on installing specifi c com-
ponents.
2-2 Unpacking the System
You should inspect the box the SuperServer 5037C-i was shipped in and note if
it was damaged in any way. If the server itself shows damage, you should fi le a
damage claim with the carrier who delivered it.
Decide on a suitable location for setting up and operating the SuperServer 5037C-i.
It should be situated in a clean, dust-free area that is well ventilated. Avoid areas
where heat, electrical noise and electromagnetic fi elds are generated. You will also
need it placed near a grounded power outlet.
! !
Warnings and Precautions!
Review the electrical and general safety precautions in Chapter 4.
•
Use a regulating uninterruptible power supply (UPS) to protect the server from
•
power surges, voltage spikes and to keep your system operating in case of a
power failure.
Allow the power supply units and Serial ATA drives to cool before touching
•
them.
To maintain proper cooling, always keep all chassis panels closed when not
•
being serviced.