Supermicro SuperServer 5035L-I, Руководство пользователя

Страница: 62 / 82

7-8
S
UPER
S
ERVER 5035L-I User's Manual
Confi gure DRAM Timing by SPD
Select Enable to allow the BIOS to read the SPD (Serial Presence Detect) chip
which is built in the memory module in order to get the exact memory specifi ca-
tions. The options are Enabled and Disabled.
Memory Hole
Use the feature to allocate memory resource reserved for use of PCI devices. If
set to 15 MB~16MB, the reserved memory will be placed in the location around
15 MB~16 MB. The options are Disabled and 15 MB~ 16 MB.
Initiate Graphic Adapter
Use the feature to select the graphics controller to be used as the primary boot
device. The options are IGD, PCI/IGD, PCI/PEG, PEG/IGD, and PEG/PCI .
Internal Graphics Device (IGD) Graphics Mode Select
Use the feature to set the amount of system memory to be used by the Internal
Graphics Devices. The options are Disabled, Enabled, 1 MB and Enabled, 8
MB.
PEG Port Confi guration
PEG Port
Use the feature to confi gure the PEG Port. The Default setting is Auto to
allow the PEG Port to be automatically detected and confi gured by the BIOS.
The options are Auto and Disabled.
PEG Force x1
If set to Enabled, PEG will be confi gured to x1 setting by the BIOS. The
options are Enabled, and Disabled .
X
Video Function Confi guration
DVMT Mode Select
This option allows the user to set the DVMT mode. The options are Fixed Mode,
DVMT Mode and the COMBO mode.
DVMT/Fixed Memory
This option allows the user to set the amount of memory to be used for
operation in the DVMT/Fixed Mode. The options are 64 MB, 128 MB and
Maximum DVMT.