Supermicro SuperServer 5035L-I, Руководство пользователя

Страница: 33 / 82

Chapter 5: Advanced Motherboard Setup
5-9
If desired, screws can be used to secure the add-on cards into the chassis. 5.
Close the protective bracket over the tops of the add-on card brackets. 6.
The SC731 chassis includes clips to accomodate the use of long-length add-on
cards. These clips support and stabilize the long cards, preventing them from con-
tacting any undesired surfaces.
Installing Long Add-on/Expansion Cards
Locate the long card holders (A), on the opposite side of the chassis from the 1.
add-on card brackets.
Begin by installing the long card as described in the previous section. 2.
Push the long card holder all the way down onto the end of the card to se- 3.
cure it in the chassis.
Figure 5-4: Installing Add-on Cards
Add-on/Expansion
Card Slots
Release Latch (A)
Protective
Bracket (B)