Supermicro SUPERSERVER 5028D-TN4T, Руководство пользователя

Страница: 78 / 118

SUPERSERVER 5028D-TN4T User's Manual
5-16
5-9 Replacing the Backplane
The chassis includes a backplane, CSE-SAS-733TQ. In the unlikely event that
it becomes necessary to replace the backplane, follow the instructions below.
Information on backplane settings can be found on the Supermicro web site under
Accessories > Storage Backplanes > SAS > CSE-SAS-733TQ.
Replacing the Backplane
1. Power down the system as described in Section 5-1 and remove the chassis
cover.
2. Remove the screw securing the backplane mounting bracket to the chassis. Set
the screw aside for later use.
3. Remove the backplane mounting bracket with the backplane from the chassis.
4. Remove the screws securing the backplane to the backplane mounting bracket
and set these aside for later use.
5. Lift the backplane off of the backplane mounting bracket.
6. Place a new backplane into the backplane mounting bracket and secure it with
the screws previously set aside.
7. Insert the backplane and backplane mounting bracket into the chassis and
secure it with the screw previously set aside.
8. Replace the chassis cover, plug the power cord into the rear of the power supply
and power up the system.
Figure 5-18. Replacing the Backplane and Mounting Bracket