Supermicro SUPERSERVER 5025M-UR, Руководство пользователя

Страница: 24 / 130

2-8
S
UPER
S
ERVER 5025M-UR User's Manual
2-5 Checking the Motherboard Setup
After you install the 5025M-UR in the rack, you will need to open the unit to make
sure the motherboard is properly installed and all the connections have been
made.
1. Accessing the inside of the System (see Figure 2-3)
First, grasp the two handles on either side and pull the unit straight out until it locks
(you will hear a "click"). Next, depress the two buttons on the top of the chassis to
release the top cover. You can then lift the top cover from the chassis to gain full
access to the inside of the server.
2. Check the CPU (processor)
You may have a processor already installed into the motherboard. The processor
needs its own heatsink. See Chapter 5 for instructions on processor and heatsink
installation.
3. Check the system memory
Your 5025M-UR server system may have come with system memory already in-
stalled. Make sure all DIMMs are fully seated in their slots. For details on adding
system memory, refer to Chapter 5.
4. Installing add-on cards
If desired, you can install add-on cards to the system. See Chapter 5 for details
on installing PCI add-on cards.
5. Check all cable connections and airfl ow
Make sure all power and data cables are properly connected and not blocking the
chassis airfl ow. Also make sure that no cables are positioned in front of the fans.
See Chapter 5 for details on cable connections.