Chapter 6: BIOS
67
66
SuperServer 5019S-WR User's Manual
DMI VC1 Control
Use this feature to enable or disable DMI Virtual Channel 1. The options are Enabled and
Disabled
.
DMI VCm Control
Use this feature to enable or disable the DMI Virtual Channel map. The options are
Enabled
and Disabled.
DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA (System
Agent) side of the DMI Link. The options are Disabled and
L1
.
DMI Extended Sync Control
Use this feature to enable or disable the DMI extended synchronization. The options are
Enabled and
Disabled
.
DMI De-Emphasis Control
Use this feature to configure the De-emphasis control on DMI. The options are -6dB and
-3.5dB
.
PEG Port Configuration
CPU SLOT1 PCI-E 3.0 X16
SLOT1 Max Link Speed
Use this item to configure the link speed of a PCI-E port specified by the user. The options
are
Auto
, Gen1, Gen2, and Gen3.
SLOT1 Max Payload Size
Select Auto for the system BIOS to automatically set the maximum payload value for a PCI-E
device to enhance system performance. The options are
Auto
, 128 TLP, and 256 TLP.
SLOT1 Slot Power Limit Value
Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+"
or "-" on your keyboard to change this value. The default setting is
75
.
SLOT1 Slot Power Limit Scale
Use this feature to select the scale used for the slot power limit value. The options are
1.0x
, 0.1x, 0.01x, and 0.001x.
CPU SLOT2 PCI-E 3.0 X8
SLOT2 Max Link Speed
Use this item to configure the link speed of a PCI-E port specified by the user. The options
are
Auto
, Gen1, Gen2, and Gen3.
SLOT2 Max Payload Size
Select Auto for the system BIOS to automatically set the maximum payload value for a PCI-E
device to enhance system performance. The options are
Auto
, 128 TLP, and 256 TLP.
SLOT2 Slot Power Limit Value
Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+"
or "-" on your keyboard to change this value. The default setting is
75
.
SLOT2 Slot Power Limit Scale
Use this feature to select the scale used for the slot power limit value. The options are
1.0x
, 0.1x, 0.01x, and 0.001x.
Memory Configuration
The following memory information will display:
•
Memory RC Version
•
Memory Frequency
•
Total Memory
•
VDD
•
DIMMA1
•
DIMMA2
•
DIMMB1
•
DIMMB2
•
Memory Timings (tCL-tRCD-tRP-tRAS)
Maximum Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory modules. The
options are
Auto
,
1067, 1200,
1333, 1400, 1600, 1800, 1867, 2000, 2133, 2200, and 2400.
ECC Support
Select Enabled to enable Error Checking & Correction (ECC) support for onboard memory
modules. The options are Disabled and
Enabled
.
