Supermicro SUPERSERVER 5018A-TN7B, Руководство пользователя

Страница: 78 / 122

SUPERSERVER 5018A-TN7B User's Manual
6-12
The chassis includes a single 200 watt power supply. This power supply has an
auto-switching capability, which enables it to automatically sense and operate at a
100V - 240V input voltage.
If the power supply unit fails, the system will shut down and you will need to replace
the unit. Replacement units can be ordered directly from Supermicro.
Replacing the Power Supply
1. If power is on, power down as described in Section 6-2. Remove the chassis
cover.
2. Disconnect all wiring from the power supply.
3. Remove the four screws which hold the power supply in the chassis. The two
rear mounting screws are located on the rear of the chassis. The two mid-chassis
mounting screws are accessed on the underside and extend upwards through
the chassis. Set the screws aside for later use.
6-8 Power Supply
Figure 6-10. Installing the Power Supply
Power Supply
Mid-chassis
Mounting Screws
Rear Mounting Screws