Supermicro SUPERSERVER 4028GR-TR, Руководство пользователя

Страница: 62 / 140

5-14
SUPERSERVER 4028GR-TR(T)(2) User's Manual
Reset Connector
The reset connector is located on pins 3
and 4 of JF1 and attaches to the reset
switch on the computer chassis. See the
table on the right for pin definitions.
Reset Button
Pin Definitions
(JF1)
Pin# Definition
3 Reset
4 Ground
Figure 5-7. JF1 Control Panel Header Pins
NMI
x (Key)
3.3V
FP UID/3.3V Stby
NIC1 LED (Activity)
NIC2 LED (Activity)
Blue LED (UID Cathode)
3.3V
Reset (Button)
Power (Button)
Ground
x (Key)
Power On LED
HDD LED
NIC1 LED (Link)
NIC2 LED (Link)
OH/Fan Fail/UID LED
PWR Fail LED
Ground
Ground
2 1
20 19
Control Panel Connectors
Power Button Connector
The PW_ON connector is on pins 1 and 2
of JF1. Momentarily contacting both pins
will power on/off the system. This button
can also be configured to function as a
suspend button (with a setting in the BIOS,
see Chapter 7). To turn off the power when
set to suspend mode, press the button for
at least 4 seconds. Refer to the table on
the right for pin definitions.
This header should be connected to the
chassis power button.
Power Button
Pin Definitions
(JF1)
Pin# Definition
1 Signal
2 Ground