Supermicro SuperServer 2026GT-TRF Скачать руководство пользователя страница 91 | Manualshive

Страница: 91 / 106

Supermicro SuperServer 2026GT-TRF Скачать руководство пользователя страница 91

Chapter 7: BIOS

7-19

X

ACPI Con

fi

guration

Use this feature to con

fi

gure Advanced Con

fi

guration and Power Interface (ACPI)

power management settings for your system.

High Precision Event Timer

Select Enabled to activate the High Performance Event Timer (HPET) that produces
periodic interrupts at a much higher frequency than a Real-time Clock (RTC) does in
synchronizing multimedia streams, providing smooth playback and reducing the de-
pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-
tion embedded in the CPU. The High Performance Event Timer is used to replace
the 8254 Programmable Interval Timer. The options are

Enabled

and Disabled.

USB Device Wake-Up

Select Enabled for the system to wake up from the standby mode by a Universal
Serial Bus (USB) device (such as, a USB mouse or USB keyboard). The options
are Enabled and

Disabled

.

ACPI Aware O/S

Select Yes to enable ACPI support if it is supported by the OS to control ACPI
through the Operating System. Otherwise, disable this feature. The options are

Yes

and No.

ACPI APIC Support (Available ACPI Aware O/S='Yes')

Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System
Description Table) pointer list. The options are

Enabled

and Disabled.

APIC ACPI SCI IRQ

When this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system.
The options are Enabled and

Disabled

.

Headless Mode (Available ACPI Aware O/S='Yes')

This feature is used to enable system to function without a keyboard, monitor or
mouse attached The options are Enabled and

Disabled

.

ACPI Version Features (Available ACPI Aware O/S='Yes')

The options are ACPI v1.0,

ACPI v2.0

and ACPI v3.0. Please refer to ACPI's website

for further explanation: http://www.acpi.info/.

NUMA Support

If this feature is enabled, Non-Uniform Memory Access will enhance CPU perfor-
mance. The options are

Enabled,

Disabled and NUMA for SLES11 (SUSE Linux

Enterprise Server 11).

«
...
89
90
91
92
93
...
»

Содержание SuperServer 2026GT-TRF











































































































Отзывы:

Нет отзывов