Supermicro SuperServer 2026GT-TRF Скачать руководство пользователя страница 75

Страница: 75 / 106

Chapter 7: BIOS

7-3

Use this option to change the system time and date. Highlight

System Time

Sys-

tem Date

using the arrow keys. Enter new values through the keyboard and press

<Enter>. Press the <Tab> key to move between

elds. The date must be entered

in MM/DD/YY format. The time is entered in HH:MM:SS format.

Note:

The time is in the 24-hour format. For example, 5:30 P.M. appears as

17:30:00.

Supermicro X8DTG-QF+

•

Version: This item displays the BIOS revision used in your system.

•

Build Date: This item displays the date when this version of BIOS was com-
pleted.

Processor

The AMI BIOS will automatically display the status of the processor used in your
system:

•

CPU Type: This item displays the type of CPU used in the motherboard.

•

Speed: This item displays the speed of the CPU detected by the BIOS.

•

Physical Count: This item displays the number of processors installed in your
system as detected by the BIOS.

•

Logical Count: This item displays the number of CPU Cores installed in your
system as detected by the BIOS.

System Memory

This displays the memory size available in the system.

Содержание SuperServer 2026GT-TRF











































































































Результаты поиска

Содержание SuperServer 2026GT-TRF

Отзывы:

Supermicro SuperServer 2026GT-TRF, Руководство пользователя, Страница: 75 / 106

Результаты поиска

Содержание SuperServer 2026GT-TRF

Отзывы: