manualshive.com logo in svg

Supermicro SuperServer 2026GT-TRF, Руководство пользователя, Страница: 57 / 106

Поделиться
Скачать
Supermicro SuperServer 2026GT-TRF Скачать руководство пользователя страница 57

Chapter 5: Advanced Serverboard Setup

5-25

Supero Doctor III

The Supero Doctor III program is a web-based management tool that supports 
remote management capability. It includes Remote and Local Management tools. 
The local management is called SD III Client. The Supero Doctor III program in-
cluded on the CD-ROM that came with your motherboard allows you to monitor 
the environment and operations of your system. Supero Doctor III displays crucial 
system information such as CPU temperature, system voltages and fan status. See 
the Figure below for a display of the Supero Doctor III interface.

Note:

 The default User Name and Password for SuperDoctor III is ADMIN / AD-

MIN.

Note:

 When SuperDoctor III is 

fi

 rst installed, it adopts the temperature threshold 

settings that have been set in BIOS. Any subsequent changes to these thresholds 
must be made within Super Doctor, as the Super Doctor settings override the BIOS 
settings. To set the BIOS temperature threshold settings again, you would 

fi

 rst need 

to uninstall SuperDoctor III.

Supero Doctor III Interface Display Screen  (Health Information)

Содержание SuperServer 2026GT-TRF











































































































Отзывы:

Нет отзывов