76
Chapter 6: Optional Components
Figure 6-1. Cable Management Arm
6.4 Cable Management Arm
The system supports a cable management arm (CMA), which keeps the rear cables organized
and clear of the rail mechanisms when the system is extended out the front of the rack for
maintenance.
The CMA attaches to the rack mounting rails by means of four connectors. They are labeled
on the connectors 1, 2, 3, and 4.
Installing the Cable Management Arm
1. Slide CMA connector #1 forward onto the two posts on the rear of the right
inner
rail
(right side when viewed from the front). It snaps into place.
2. Slide CMA connector #2 forward onto the two posts on the rear of the right
middle
rail. It
snaps into place.
6.3 GPU Support
Only single-width, half-length GPUs are supported. Installation is the same as PCIe expansion
cards.
GPU Support
Quantity
Two single-width half-length full-height
Power Cable
none required
Thermal Kit
Upgraded fans: six FAN-0163L4
Conditions
Supports up to 185W TDP CPU
