10
SuperServer 1029GP-TR User's Manual
Control Panel Features
Item
Feature
Description
1
Information LED
See table on the following page.
2
NIC2 LED
Indicates network activity on the LAN2 port when flashing
3
NIC1 LED
Indicates network activity on the LAN1 port when flashing
4
HDD LED
Indicates activity on the hard drive when flashing
5
Power LED
Indicates power is being supplied to the system power supply units. This LED
should normally be illuminated when the system is operating.
6
UID LED
The unit identification (UID) button turns on or off the blue light function of
the Information LED and the blue LED on the rear of the chassis. These are
used to locate the server in large racks and server banks.
7
Power Button
The main power button is used to apply or remove power from the power
supply to the server. Turning off system power with this button removes the
main power but maintains standby power. To perform many maintenance
tasks, you must also unplug system before servicing
Figure 1-1. Control Panel View
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. See Chapter 4 for
details on the control panel connections.
1
7
6
5
4
3
2
