SuperServer 1029GP-TR User's Manual
32
Memory Installation
Memory Support
The X11DPG-SN supports up to 4TB of DDR4-2933/2666/2400/2133 3DS LRDIMM, LRDIMM,
RDIMM, or NVDIMM in 16 DIMM slots.
Note:
2933 MHz memory is supported by the
82xx/62xx platform only. Only Platinum-level and Gold-level processors support Intel Optane
TM
DC Persistent Memory Module (DCPMM).
Installing Memory
Begin by removing power from the system as described in Section 3.1.
1. Insert DIMM modules in the order as shown ion the table on page 33. For the system to
work properly, please use memory modules of the same type and speed.
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the receptive point on the memory slot.
4. Align the notches on both ends of the module against the receptive points on the ends
of the slot.
5. Use two thumbs together to press the notches on both ends of the module straight down
into the slot until the module snaps into place.
6. Press the release tabs to the lock positions to secure the DIMM module into the slot.
DIMM Removal
Reverse the steps above to remove the DIMM modules from the motherboard.
Caution:
Exercise extreme caution when installing or removing memory modules to prevent
any possible damage to the DIMMs or slots.
Note:
Visit the product page on the Supermicro website for possible updates to memory
Caution:
In single-CPU configurations, memory must be installed in the DIMM slots associated
with the installed CPU.
Release Tabs
Notches
Press both ends
straight down into
the memory slot.
Figure 3-7. Installing DIMMs
