Supermicro SuperServer 1027R-WTRFTP, Руководство пользователя

Страница: 73 / 128

Chapter 5: Advanced Serverboard Setup
5-27
5-10 Onboard Indicators
LAN LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs. On
each Gigabit LAN port, the right LED
indicates activity when blinking while
the left LED may be green, amber or
off to indicate the speed of the connec-
tion. See the table on the right for the
functions associated with the activity
(connection speed) LED.
LAN LED
Connection Speed Indicator
LED Color Definition
Off No Connection/10 Mbps/100 Mbps
Amber 1 Gb/s
Green 10 Gbps
ME Manufacture Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 Manufacture Mode
ME Manufacture Mode
Jumper JPME2 allows the user to flash
the system firmware from a host server
to modify system settings. Close this
jumper to bypass SPI flash security
and force ME into the manufacture
mode. See the table on the right for
jumper settings.
ME Recovery Mode
Close Jumper JPME1 to select ME
Firmware Recovery mode, which will
limit resource allocation for essential
system operation only in order to
maintain normal power operation and
management. In the single operation
mode, online upgrade will be available
via Recovery mode. See the table on
the right for jumper settings.
ME Recovery Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 ME Recovery
Activity LED Link LED
Note: For TLAN 1/2 LED indicators, please refer to JF2 and LEB7 on page 5-34.