11
10
SuperServer 1019S-MC0T User's Manual
Chapter 1: Introduction
Control Panel Features
Item
Feature
Description
1
Universal ID LED
Indicates server location for easy system location in large stack configurations.
Another UID is located on the rear of the chassis.
2
Reset Button
The reset button is used to reboot the system.
3
Power Button
The main power button is used to apply or remove power from the power supply
to the server. Turning off system power with this button removes the main power
but maintains standby power. To perform many maintenance tasks, you must
also unplug system before servicing.
4
Overheat/Fan Fail LED
When flashing, this LED indicates a fan failure. When on continuously it
indicates an overheat condition.
5
NIC2 LED
Indicates network activity on LAN port 2 when flashing.
6
NIC1 LED
Indicates network activity on LAN port 1 when flashing
7
HDD LED
Indicates activity on the hard drive when flashing.
8
Power LED
Indicates power is being supplied to the system's power supply unit. This LED
should normally be illuminated when the system is operating.
Figure 1-1. Control Panel View
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. See Chapter 4 for
more details on the control panel.
Front Chassis Features
Item
Feature
Description
1
HDD
Hot-swap 2.5" SATA hard disk drive
2
Control Panel
Front control panel with LEDs and buttons (see preceding page)
3
Rack Ear Brackets
Attaches server chassis to the rack
Figure 1-2. Chassis Front View
Front Features
The SC113MFAC2-341CB is a mini 1U chassis. See the illustration below for the features
included on the front of the chassis.
1
7
6
5
4
3
2
8
1
3
3
2
1
1
1
1
1
1
1
