SuperServer 1019C-FHTN8 User's Manual
20
Figure 2-2. Installing the Inner Rails
(Right side shown)
Figure 2-1. Identifying the Sections of the Rack Rails
2.3 Installing the Rails
This is a guideline for installing the unit into a rack with the sliding rails. There are a variety
of rack units on the market, which may mean the assembly procedure may differ slightly.
Refer also to instructions that came with the rack.
Each rail set consists of two sections: an inner rail that secures to the chassis and an outer
rail that secures to the rack.
Note that the rails are left/right side specific.
Inner Rails
The inner rails are pre-attached to the chassis, but should the need arise to remove them,
reinstallation of the rails is simple and can be accomplished with a screwdriver.
Installing the Inner Rails
Place the inner rail on the side of the chassis aligning the hooks of the chassis with the inner
rail holes, and slide the extension toward the front of the chassis. Secure the chassis with
one screw
Inner Rail
Outer Rail
Locking Tab
