Supermicro Supero X6DAL-B2 Скачать руководство пользователя страница 71

Страница: 71 / 116

Chapter 4: AMI BIOS

4-19

System Health Monitor

This feature allows the AMI BIOS to automatically display the status of the

following items:

CPU Overheat Temperature

The feature allows the user to set the CPU overheat temperature
threshold. The options range from 65

C to 90

C. The default setting is

C. (*See the note below.)

If System Health Function is enabled, BIOS will automatically display the
status of the following items:

CPU1 Temperature, CPU2 Temperature, System Temperature

The AMI BIOS will automatically display the following information:

CPU1 VCORE/CPU2 VCORE (*for 2U systems), 3.3V Vcc(V), +5 Vin, 12V Vcc(V), -

12V Vcc (V), DRAM VTT, 1.2V Vcc, DIMM Voltage, 1.5V Voltage, 5V Standby and

3.3V Standby.

Fan Speed Control Modes: (Fan 1 to Fan 6)

This feature allows the user to decide how the system controls the speeds

of the onboard fans. If the option is set to 3-pin Server, the fan speed is

controlled by the CPU temperature. When the CPU temperature is higher,

the fan speed will be higher as well. If this option is set to 4-pin, the

onboard fan speeds are controlled by Thermal Management via PWM. If set

to Disable, the fan speed control is disabled and the onboard fan will run

at full speed (12V) at all time. Select 3-pin if your chassis came with 3-pin

fan headers. Select 4-pin if your chassis came with 4-pin fan headers.

Select Server if your system is used as a server. Select Workstation if your

system is used a Workstation. The Options are: Disable, 3-pin Server, 3-

pin Workstation, 4-pin Server and 4-pin Workstation.

*Note: In the Windows environment, the Supero Doctor III settings take

precedence over the BIOS settings. When first installed, Supero Doctor III

adopts the temperature threshold settings previously set in the BIOS. Any

subsequent changes to these thresholds must be made within Supero Doc-

tor, since the SDIII settings override the BIOS settings. For the Windows OS

to adopt the BIOS temperature threshold settings, please change the SDIII to

be the same as those set in the BIOS.

Содержание Supero X6DAL-B2





















































































































Результаты поиска

Содержание Supero X6DAL-B2

Отзывы:

Похожие инструкции для Supero X6DAL-B2

Бренды по названию

Популярные бренды

Supermicro Supero X6DAL-B2, Руководство пользователя

Результаты поиска

Содержание Supero X6DAL-B2

Отзывы:

Похожие инструкции для Supero X6DAL-B2

Бренды по названию

Популярные бренды