Supermicro Supero X6DAL-B2, Руководство пользователя

Страница: 22 / 116

2-2
X6DAL-B2/X6DAL-TB2 User's Manual
IMPORTANT: Always connect the power cord last and always remove it
before adding, removing or changing any hardware components. Make
sure that you install the processor into the CPU socket before you install
the CPU heatsink. Note that for the X6DAL-B2/X6DAL-TB2 you need to
install the Xeon mounting plate under the board.
2-2 Xeon EM64T Processor and Heatsink Installation
When handling the processor package, avoid placing direct
pressure on the label area of the fan. Also, do not place the
motherboard on a conductive surface, which can damage the
BIOS battery and prevent the system from booting up.
!
CPU Installation
1. Lift the lever on the CPU socket:
lift the lever completely as shown
on the picture on the right;
otherwise, you will damage the
CPU socket when power is
applied. (Install CPU1 first.)
Socket lever
Installing the CPU Mounting Plate
(*Note: CPU Retention Brackets are
pre-installed.)
1. Place the CPU retention bracket
on top of the CPU mounting plate.
CPU Mounting
Plate
CPU Retention
Bracket
CPU Socket
Mounting
Holes
Mounting Holes
w/Standoffs
Xeon CPU
Heatsink
2. Install the CPU mounting plate
below the retention bracket on the
reverse side of the motherboard.
3. Properly place the CPU on top of
the CPU socket. Align Pin 1 on the
CPU with Pin 1 on the CPU socket.
Mounting Plate
Motherboard
CPU Socket
CPU
Heatsink