Supermicro Supero X6DAL-B2, Руководство пользователя

Страница: 61 / 116

Chapter 4: AMI BIOS
4-9
the BIOS to use Ultra DMA mode 1. It has a data transfer rate of 25 MBs.
Select UDMA2 to allow the BIOS to use Ultra DMA mode 2. It has a data
transfer rate of 33.3 MBs. Select UDMA3 to allow the BIOS to use Ultra
DMA mode 3. It has a data transfer rate of 66.6 MBs. Select UDMA4 to
allow the BIOS to use Ultra DMA mode 4 . It has a data transfer rate of
100 MBs. The options are Auto, SWDMAn, MWDMAn, and UDMAn.
S. M. A. R. T.
Self-Monitoring Analysis and Reporting Technology (SMART) can help
predict impending drive failures. Select "Auto" to allow the BIOS to auto
detect hard disk drive support. Select "Disabled" to prevent the AMI BIOS
from using the S.M.A.R.T. Select "Enabled" to allow the AMI BIOS to use
the S.M.A.R.T. to support hard drive disk. The options are Disabled,
Enabled, and Auto.
32Bit Data Transfer
Select "Enabled" to activate the function of 32-Bit data transfer. Select
"Disabled" to deactivate the function. The options are Enabled and Dis-
abled.
Hard Disk Write Protect
Select Enabled to enable the function of Hard Disk Write Protect to prevent
data from being written to HDD. The options are Enabled or Disabled.
IDE Detect Time Out
This feature allows the user to set the time-out value for detecting ATA,
ATA PI devices installed in the system. The options are 0 (sec), 5, Mode 1.0,
15, 20, 25, 30, and 35.
X X X X X
Floppy Configuration
This option allows the user to configure the settings for the Floppy Drives
installed in the system.
Floppy A
Move the cursor to these fields via up and down <arrow> keys to select
the floppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4",
720 KB 3½", 1.44 MB 3½”, and 2.88 MB 3½". Default setting for Floppy A
drive is 1.44 MB 3½”.
OnBoard Floppy Controller
Select "Enabled" to enable the Onboard Floppy Controller. The options are
"Disabled", and "Enabled."