Supermicro SUPERO SUPERSERVER 2027GR-TRF Скачать руководство пользователя

Страница: 90 / 112

7-16

UPER

ERVER 2027GR-TRF User's Manual

Select MWDMA0 to allow BIOS to use Multi-Word DMA mode 0. It has a data

transfer rate of 4.2 MB/s.

Select MWDMA1 to allow BIOS to use Multi-Word DMA mode 1. It has a data

transfer rate of 13.3 MB/s.

Select MWDMA2 to allow BIOS to use Multi-Word DMA mode 2. It has a data

transfer rate of 16.6 MB/s.

Select UDMA0 to allow BIOS to use Ultra DMA mode 0. It has a data transfer

rate of 16.6 MB/s. It has the same transfer rate as PIO mode 4 and Multi-Word

DMA mode 2.

Select UDMA1 to allow BIOS to use Ultra DMA mode 1. It has a data transfer

rate of 25 MB/s.

Select UDMA2 to allow BIOS to use Ultra DMA mode 2. It has a data transfer

rate of 33.3 MB/s.

Select UDMA3 to allow BIOS to use Ultra DMA mode 3. It has a data transfer

rate of 44.4 MB/s.

Select UDMA4 to allow BIOS to use Ultra DMA mode 4. It has a data transfer

rate of 66.6 MB/s.

Select UDMA5 to allow BIOS to use Ultra DMA mode 5. It has a data transfer

rate of 100 MB/s.

Select UDMA6 to allow BIOS to use Ultra DMA mode 6. It has a data transfer

rate of 133 MB/s. The options are

Auto

, SWDMAn, MWDMAn, and UDMAn.

S.M.A.R.T. For Hard disk drives

Self-Monitoring Analysis and Reporting Technology (SMART) can help predict

impending hard disk drive failures. Select Auto to allow AMI BIOS to automati-

cally detect hard disk drive support. Select Disabled to prevent AMI BIOS from

using the S.M.A.R.T. Select Enabled to allow AMI BIOS to use the S.M.A.R.T. to

support hard drive disk. The options are Disabled, Enabled and

Auto

32Bit Data Transfer

Select Enabled to support 32-bit IDE data transfer. The options are

Enabled

and Disabled.

Hard Disk Write Protect

Select Enabled to support Hard Disk Write Protect to prevent data from being written

to a hard drive. The options are Enabled or

Disabled

IDE Detect Timeout (sec)

Use this feature to set the timeout value to allow BIOS to detect any installed ATA,

ATAPI devices. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and

Содержание SUPERO SUPERSERVER 2027GR-TRF

















































































































Результаты поиска

Содержание SUPERO SUPERSERVER 2027GR-TRF

Отзывы:

Похожие инструкции для SUPERO SUPERSERVER 2027GR-TRF

Бренды по названию

Популярные бренды

Supermicro SUPERO SUPERSERVER 2027GR-TRF, Руководство пользователя

Результаты поиска

Содержание SUPERO SUPERSERVER 2027GR-TRF

Отзывы:

Похожие инструкции для SUPERO SUPERSERVER 2027GR-TRF

Бренды по названию

Популярные бренды