Supermicro SUPERO SUPERSERVER 2027GR-TRF Скачать руководство пользователя

Страница: 81 / 112

Chapter 7: BIOS

7-7

CPU Multi-Core Enable/Disable (Available when supported by the CPU)

Select Enabled to enable multi-core CPU support to enhance CPU performance.

The options are Disabled and

Enabled.

A20M

When the A20M# pin is enabled, it will force address bit 20 to zero (to be masked)

to emulate the address wraparound for the real-address mode at 1 MB. Set this

item to Enabled for the legacy operating systems and applications that require A20M

support to work properly. The options are Enabled and

Disabled

Intel® SpeedStep™ Technology

Intel EIST (Enhanced Intel SpeedStep Technology) allows the system to automati-

cally adjust the processor voltage and core frequency in an effort to reduce power

consumption and heat dissipation. Please refer to Intel’s Website for detailed infor-

mation. The options are Disable (Disable GV3) and

Enable (Enable GV3)

Intel® TurboMode Tech (Available when Intel EIST Technology is enabled)

Select Enabled to use the TurboMode Technique to boost system performance. The

options are

Enabled

and Disabled.

Performance/Walt Select

Use this feature to balance the need between system performance and energy sav-

ing. The options are

Traditional

and Power Optimized (for energy saving).

Intel® C-STATE Tech

If this feature is enabled, C-State is set by the system automatically to either C2, C3

or C4 state. The options are Disabled and

Enabled

. If this feature is set to Enabled,

the following items will display.

C-State Package Limit Setting

If this feature is set to Auto, the AMI BIOS will automatically set the limit on the

C-State package register. The options are

Auto

, C1, C3, C6 and C7.

C1 Auto Demotion

Select Enabled to allow the CPU to demote C3, C6, or C7 requests to C1 based on

un-core auto-demote information. The options are Disabled and

Enabled.

C3 Auto Demotion

If this feature is set to Enabled, the CPU will conditionally demote C6 or C7 re-

quests to C3 based on un-core auto-demote information. The options are Disabled

and

Enabled.

Содержание SUPERO SUPERSERVER 2027GR-TRF

















































































































Результаты поиска

Содержание SUPERO SUPERSERVER 2027GR-TRF

Отзывы:

Похожие инструкции для SUPERO SUPERSERVER 2027GR-TRF

Бренды по названию

Популярные бренды

Supermicro SUPERO SUPERSERVER 2027GR-TRF, Руководство пользователя

Результаты поиска

Содержание SUPERO SUPERSERVER 2027GR-TRF

Отзывы:

Похожие инструкции для SUPERO SUPERSERVER 2027GR-TRF

Бренды по названию

Популярные бренды