Supermicro Supero 6037R-E1R16N, Руководство пользователя

Страница: 60 / 75

Chapter 7: BIOS
7-13 7-12
S
UPER
S
TORAGE
S
YSTEM 6037R-E1R16N User's Manual
Isoc
Select Enabled to enable Ischronous support to meet QoS (Quality of Service)
requirements. This feature is especially important for virtualization technology.
The options are
Disabled and Enabled.
QPI (Quick Path Interconnect) Link Speed Mode
Use this feature to select data transfer speed for QPI Link connections. The
options are
Fast and Slow.
QPI Link Frequency Select
Use this feature to select the desired QPI frequency. The options are Auto , 6.4
GT/s, 7.2 GT/s, and 8.0 GT/s.
QPI Link0s
This feature allows the user to set the QPI power state to a lower setting for QPI
Link0s. The options are
Disabled and Enabled.
QPI Link0p
This feature allows the user to set the QPI power state to a lower setting for QPI
Link0p. The options are
Disabled and Enabled.
 DIMM Configuration
Current Memory Mode
This item displays the current memory mode.
Current Memory Speed
This item displays the current memory speed.
Mirroring
This item displays if memory mirroring is supported by the motherboard.
Sparing
This item displays if memory sparing can be supported by the motherboard.

DIMM Information
CPU Socket 0 DIMM Information/CPU Socket 1 DIMM Information
P1/P2-DIMMA1~3, P1/P2-DIMMB1~3, P1/P2-DIMMC1~3, P1/P2-DIMMD1~3
The status of the memory modules specified above will be displayed as detected
by the BIOS.
Memory Mode
When Independent is selected, all DIMMs are available to the operating system.
When Mirroring is selected, the motherboard maintains two identical copies of all
data in memory for data backup. When Lockstep is selected, the motherboard
uses two areas of memory to run the same set of operations in parallel. The
options are
Independent , Mirroring, and Lockstep.
DDR Speed
Use this feature to force a DDR3 memory module to run at a frequency other
than what the system is specified in the specification. The options are Auto ,
Force DDR3-800, Force DDR3-1066, Force DDR3-1333, Force DDR3-1600
and Force SPD.
Channel Interleaving
This feature selects from the different channel interleaving methods. The options
are
Auto , 1 Way, 2 Way, 3, Way, and 4 Way.
Rank Interleaving
This feature allows the user to select a rank memory interleaving method. The
options are
Auto , 1 Way, 2 Way, 4, Way, and 8 Way.
Patrol Scrub
Patrol Scrubbing is a process that allows the CPU to correct correctable memory
errors detected on a memory module and send the correction to the requestor
(the original source). When this item is set to Enabled, the IO hub will read and
write back one cache line every 16K cycles, if there is no delay caused by internal
processing. By using this method, roughly 64 GB of memory behind the IO hub
will be scrubbed every day. The options are
Enabled and Disabled.
Demand Scrub
Demand Scrubbing is a process that allows the CPU to correct correctable
memory errors found on a memory module. When the CPU or I/O issues a
demand-read command, and the read data from memory turns out to be a
correctable error, the error is corrected and sent to the requestor (the original
source). Memory is updated as well. Select Enabled to use Demand Scrubbing
for ECC memory correction. The options are Enabled and
Disabled .
Data Scrambling
Select Enabled to enable data scrubbing and ensure data security and integrity.
The options are
Disabled and Enabled.