background image

56

Appendix B: Standardized Warning Statements

전원 케이블 및 AC 어댑터

경고! 제품을 설치할 때 현지 코드 및 적절한 굵기의 코드와 플러그를 포함한 안전 요구 
사항을 준수하여 제공되거나 지정된 연결 혹은 구매 케이블, 전원 케이블 및 AC 어댑터를 
사용하십시오.

다른 케이블이나 어댑터를 사용하면 오작동이나 화재가 발생할 수 있습니다. 전기 용품 
안전법은 UL 또는 CSA 인증 케이블 (코드에 UL / CSA가 표시된 케이블)을 Supermicro
가 지정한 제품 이외의 전기 장치에 사용하는 것을 금지합니다.

Stroomkabel en AC-Adapter

Waarschuwing! Bij het aansluiten van het Product uitsluitend gebruik maken van de geleverde 
Kabels of een andere geschikte aan te schaffen Aansluitmethode, deze moet altijd voldoen 
aan de lokale voorschriften en veiligheidsnormen, inclusief de juiste kabeldikte en stekker. 

Het gebruik van niet geschikte Kabels en/of Adapters kan een storing of brand veroorzaken. 
Wetgeving voor Elektrische apparatuur en Materiaalveiligheid verbied het gebruik van UL of 

CSA -gecertificeerde Kabels (met UL/CSA in de code) voor elke andere toepassing dan de 

door Supermicro hiervoor beoogde Producten.

Disclaimer (cont.)

The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities 

or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be 

reasonably expected to result in significant injury or loss of life or catastrophic property damage. Accordingly, Supermicro disclaims 

any and all liability, and should buyer use or sell such products for use in such ultra-hazardous applications, it does so entirely at its 

own risk. Furthermore, buyer agrees to fully indemnify, defend and hold Supermicro harmless for and against any and all claims, de-

mands, actions, litigation, and proceedings of any kind arising out of or related to such ultra-hazardous use or sale.

Содержание SCLA25


























































Отзывы: