Supermicro SCF424 Series, Руководство пользователя

Страница: 51 / 104

5-11
Chapter 5: Chassis Setup and Maintenance
Figure 5-11: Removing the Screws at the Top of the Backplane
(Your node and backplane may differ from those shown in this illustration)
5-7 Removing and Installing the Backplane
The SCF424 chassis backplane is located behind the hard drives and in front of
the front system fans in each motherboard node. Although backplane failure rarely
occurs, in the event of a backplane failure, follow the instructions below.
Removing the Backplane
Removing the Backplane from the Chassis
1. Power down the system and remove the power cord from the rear of the
power supply as described in Section 5-2. Remove the node from the chas-
sis as described in Section 5-3 and place the node on a flat, stable surface.
Remove the cover from the node as described in Section 5-5.
2. Remove the node cover (see 5-6 Removing the Node Cover) and air shroud
(see 5-11 Installing the Air Shroud).
3. Remove the four screws securing the fan tray to the floor of the node.
1
3