Chassis SC946L JBOD User's Manual
28
Figure 2-6. Removing the Chassis From the Rack
2
1
Release Levers
Removing the Chassis from the Rack
Caution!
It is dangerous for a single person to off-load the heavy chassis from the
rack without assistance. Be sure to have sufficient assistance supporting the chassis
when removing it from the rack. Use a lift.
1. LIft the release levers and pull the chassis out the front of the rack until it stops.
2. Press the release latches on each of the inner rails downward simultaneously and
continue to pull the chassis completely out of the rack.
Stability hazard. The rack stabilizing mechanism must be in place, or the rack must
be bolted to the floor before you slide the unit out for servicing. Failure to stabilize the
rack can cause the rack to tip over.
Slide rail mounted equipment is not to be used as a shelf or a work space.
2.4 Optional Quick Installation Method
The following quick installation method may be used to install the chassis to a rack.
Installing the Chassis into a Rack
1. Install the whole rail assembly into the rack in a manner similar to that described in the
previous section, "Installing the Outer Rails onto the Rack."
2. Fully extend the inner rails.
3. Using a lift, carefully align the chassis between the inner rails.
4. Install the inner rails on the chassis in a manner similar to that described in the previous
section, "Installing the Inner Rails."
