manualshive.com logo in svg

Supermicro SBI-7127R-S6, Руководство пользователя, Страница: 33 / 86

Поделиться
Скачать
Supermicro SBI-7127R-S6 Скачать руководство пользователя страница 33

3-1

Chapter 3

Setup and Installation

3-1

Overview

This chapter covers the setup and installation of the blade module and its components.

3-2

Installing Blade Modules

Up to ten SBI-7127R-S6 blade module may be installed into a single blade enclosure. 
Blade modules with Windows and Linux operating systems may be mixed together in 
the same blade enclosure.

Powering Up a Blade Unit

Each blade unit may be powered on and off independently from the rest of the blades 
installed in the same enclosure. A blade unit may be powered up in two ways:

•

Press the power button on the blade unit.

•

Use IPMIView or the web-browser based management utility to apply power using 
the CMM module.

Powering Down a Blade Unit

A blade unit may be powered down in either of the following ways:

•

Press the power button on the blade unit.

•

Use IPMIView or the web-browser based management utility to power down (if you 
have Operator or Admin privileges on the CMM).

•

Use IPMItool when connected to the CMM to power down (if you have Operator or 
Admin privileges on the CMM).

Содержание SBI-7127R-S6























































































Отзывы:

Нет отзывов