manualshive.com logo in svg

Supermicro MicroBlade MBI-6119G-C2, Руководство пользователя

Поделиться
Скачать
Supermicro MicroBlade MBI-6119G-C2 Скачать руководство пользователя страница 9

1-1

Chapter 1

Introduction

1-1

Overview

This user’s manual covers the MBI-6119G-C2 MicroBlade module. These MicroBlade 
module are compact self-contained servers that connect into pre-cabled enclosures that 
provide power, cooling, management and networking functions. One enclosure for these 
MicroBlade module can hold twenty-eight blade units. These MicroBlade module use 
the Intel Xeon E3-1200 v5 processor.

In this manual, “blade system” refers to the entire system (including the enclosure and 
blades units), “blade”, “MicroBlade” or “blade unit” refers to a single MicroBlade module 
and “blade enclosure” is the chassis that the MicroBlades, power supplies and 
MicroBlade modules are housed within. 

Please refer to our web site for information on operating systems that have been 
certified for use with the MicroBlade (

http://www.supermicro.com/products/nfo/

microblade.cfm

).

Note: 

For your system to work properly, please follow the links below to download all 

necessary drivers/utilities and the user’s manual for your server.

•

Supermicro product manuals: 

http://www.supermicro.com/support/manuals/

•

Product drivers and utilities: 

ftp://ftp.supermicro.com

•

If you have any questions, please contact our support team at: 

[email protected]

Note: 

A complete list of safety warnings is provided on the Supermicro web site at 

http://www.supermicro.com/about/policies/safety_information.cfm

.

Содержание MicroBlade MBI-6119G-C2

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды