Supermicro MicroBlade MBI-6119G-C2, Руководство пользователя

Страница: 62 / 88

MBI-6119G-C2 MicroBlade Modules User’s Manual
5-10
 PEG Port
Configuration
This sub-menu displays options for PEG Port Configuration.
PEG 0:1:0 (LSI SAS
3008)
This shows static information for the LSI SAS 3008 system.
PEG0 Enable
Root Port Use this feature to Enable or Disable the PEG 0:1:0 Root Port. Options
include
Auto , Disabled or Enabled.
PEG0 Max Link
Speed Use this feature to configure PEG 0:1:0 Max Speed. Options include Auto ,
Gen1, Gen2 and Gen3.
PEG0 Max
Payload Size Use the feature to select the PEG0 Max Payload Size. Options include
Auto , 128 TLP and 256 TLP.
PEG0 Slot
Power Limit
Value Use this number field to set the upper limit on power supplied by the slot.
The power limit (in Watts) is calculated by multiplying this value by the
slot’s Power Limit Scale. Values range from 0-255 with a default of
75 .
PEG0 Slot
Power Limit
Scale
Use this feature to select the scale used for the Slot Power Limit Value.
Options include
1.0x , 0.1xm, 0.01x and 0.001x.
PEG 0:1:1 (Onboard
Lan1/2, i350)
This shows static information for the Onboard Lan1/2 i350 system.
PEG1 Enable
Root Port Use this feature to Enable or Disable the PEG 0:1:1 Root Port. Options
include
Auto , Disabled or Enabled.
PEG1 Max Link
Speed Use this feature to configure PEG 0:1:1 Max Speed. Options include Auto ,
Gen1, Gen2 and Gen3.
PEG1 Max
Payload Size Use the feature to select the PEG0 Max Payload Size. Options include
Auto , 128 TLP and 256 TLP.
PEG1 Slot
Power Limit
Value Use this number field to set the upper limit on power supplied by the slot.
The power limit (in Watts) is calculated by multiplying this value by the
slot’s Power Limit Scale. Values range from 0-255 with a default of
75 .
PEG1 Slot
Power Limit
Scale
Use this feature to select the scale used for the Slot Power Limit Value.
Options include
1.0x , 0.1xm, 0.01x and 0.001x.
Program PCIe
ASPM After OPROM
Use this feature to enable/disable the Program PCIe ASPM after OPROM.
When
Enabled , the PCIe ASPM will be programmed after OPROM. If
Disabled, the PCIe ASPM will be programmed before OPROM.
 Memory Configuration
This sub-menu displays and provides options to change the memory
settings.
Maximum Memory
Frequency
Use this setting to restrict the maximum memory frequency below the
enforced POR. Frequencies you can select range from 1333 ~ 3200 and
Auto . DO NOT select Reserved from the list.
Max TOLUD
This feature allows you to specify the maximum value of TOLUD. Selecting
the
Dynamic assignment would adjust TOLUD automatically based upon
the largest MMIO length of the installed graphic controller. Options include
Dynamic and values from 1 GB ~ 3.5 GB.
Table 5-5. Chipset Configuration Sub-menu (Continued)
Menu Option Description