Supermicro FatTwin F619P2-FT Скачать руководство пользователя страница 85

Страница: 85 / 146

Chapter 4: UEFI BIOS

ATS (Available when the item: Intel VT for Directed I/O ((VT-d)) is set to Enable)

Select Enable to enable ATS (Address Translation Services) support for the Non-Iscoh VT-d
engine to enhance system performance. The options are

Enable

and Disable.

Posted Interrupt (Available when the item: Intel VT for Directed I/O ((VT-d)) is set to

Enable)

Select Enable to support VT_D Posted Interrupt which will allow external interrupts to be
sent directly from a direct-assigned device to a client machine in the non-root mode to

improve virtualization efficiency by simplifying interrupt migration and lessening the need

of physical interrupts. The options are

Enable

and Disable.

Coherency Support (Non-Isoch) (Available when the item: Intel VT for Directed I/O

((VT-d)) is set to Enable)

Select Enable for the Non-Iscoh VT-d engine to pass through DMA (Direct Memory Access)
to enhance system performance. The options are

Enable

and Disable.



Intel® VMD Technology



Intel

VMD for Volume Management Device on CPU1

VMD Config for PStack1

Intel® VMD for Volume Management Device

Select Enable to use the Intel Volume Management Device Technology for this stack. The
options are

Disable

and Enable.

*If the item "Intel VMD for Volume Management Device" above is set to Enable, the following
items will be displayed:

VMD port 2A~VMD port 2D (Available when the device is detected by the system)

Select Enable to use the Intel Volume Management Device Technology for this specific root

port. The options are

Disable

and Enable.

Hot Plug Capable (Available when the device is detected by the system)

Use this feature to enable hot plug support for PCI-E root ports 2A~2D. The options are

Disable

and Enable.

VMD Config for PStack2

Intel® VMD for Volume Management Device

Select Enable to use the Intel Volume Management Device Technology for this stack. The
options are

Disable

and Enable.

*If the item "Intel VMD for Volume Management Device" above is set to Enable, the following
items will be displayed:

Содержание FatTwin F619P2-FT



















































































































































Результаты поиска

Содержание FatTwin F619P2-FT

Отзывы:

Похожие инструкции для FatTwin F619P2-FT

Бренды по названию

Популярные бренды

Supermicro FatTwin F619P2-FT, Руководство пользователя

Результаты поиска

Содержание FatTwin F619P2-FT

Отзывы:

Похожие инструкции для FatTwin F619P2-FT

Бренды по названию

Популярные бренды