Supermicro FatTwin F610P2-RTN, Руководство пользователя

Страница: 42 / 116

42
Chapter 3: Maintenance and Component Installation
Intel Optane PMem 200 Series Memory Population Table
Legend (for the table above)
DDR4 Type and Capacity
DDR4 See Validation Matrix (DDR4 DIMMs validated with DCPMM)
Capacity
PMem Any Capacity (Uniformly for all channels for a given configuration)
16-DIMM Motherboard PMem Population within 1 CPU
DDR4+Pmem Mode AD Interleave P1-DIMMF1 P1-DIMME1 P1-DIMMH1 P1-DIMMG1 P1-DIMMC1 P1-DIMMD1 P1-DIMMA1 P1-DIMMB1
4+4
AD
MM
One - x4 PMem DDR4 PMem DDR4 DDR4 PMem DDR4 PMem
One - x4 DDR4
PMem
DDR4
PMem PMem
DDR4
PMem
DDR4
6+1 AD One - x1
DDR4 DDR4 - DDR4 DDR4 PMem DDR4 DDR4
- DDR4 DDR4 DDR4 DDR4 DDR4 DDR4 PMem
DDR4 DDR4 PMem DDR4 DDR4 - DDR4 DDR4
PMem DDR4 DDR4 DDR4 DDR4 DDR4 DDR4 -
DDR4 DDR4 DDR4 - PMem DDR4 DDR4 DDR4
DDR4 - DDR4 DDR4 DDR4 DDR4
PMem
DDR4
DDR4 DDR4 DDR4 PMem
-
DDR4 DDR4 DDR4
DDR4 PMem DDR4 DDR4 DDR4 DDR4
-
DDR4
Validation Matrix (DDR4 DIMMS w/PMem 200 Series)
DIMM Type
Ranks Per DIMM
& Data Width
(Stack)
DIMM Capacity (GB)
DRAM Density
8Gb 16Gb
RDIMM
(up to 3200)
1Rx8 N/A N/A
1Rx4 16GB 32GB
1Rx8 16GB 32GB
1Rx4 32GB 64GB
RDIMM 3DS
(up to 3200)
4Rx4 (2H) N/A 128GB
8Rx4 (4H) NA 256GB
LRDIMM (up to 3200) 4Rx4 64GB 128GB
LRDIMM 3DS
(up to 3200)
4Rx4 (2H) N/A N/A
8Rx4 (4H) 126GB 256GB
Notes:
Mode definitions: AD = App Direct Mode, MM = Memory Mode.
No mixing of PMem and NVDIMMs within the platform.
For MM, NM/FM ratio is between 1:4 and 1:16. The capacity not used for FM can be used
for AD. (NM = Near Memory; FM = Far Memory).
Matrix targets configs for optimized PMem to DRAM cache ratio in MM mode.
For each individual population, different PMem rearrangements among channels are permitted
so long as the configuration doesn’t break X12 DP Memory population rules.
Ensure the same DDR4 DIMM type and capacity are used for each DDR4 + PMem population.
If the system detects an unvalidated configuration, then the system issues a BIOS warning.
The CLI functionality is limited in non-POR configurations, and select commands will not be
supported.