Supermicro E100-9APP, Руководство пользователя

Страница: 8 / 50

13 12
SuperServer E100-9APP User's Manual Chapter 1: Introduction
Quick Reference Table
Jumper Description Default Setting
JLCDPWR1 LVDS Panel VCC Power 3.3V / 5V / 12V Pins 1-2 (3.3V), Pins 3-5 (5V), Pins 3-4 (12V)
JPF1 Power Force On Pins 1-2 (Power Force On)
JPME2 Manufacturing Mode Pins 1-2 (Normal)
LED Description Status
LED1 Power LED (for debugging only)
Solid Green: S0 mode
Solid Red: S3/S4/S5 modes
Connector Description
AUDIO FP Front Panel Audio Header
BT1
Battery Connector
(To Clear CMOS, remove the battery, short pins 1-2 and install the battery.)
FAN1 * System Fan Header
I-SATA1 * Intel® PCH SATA 3.0 Port
JCOM1: COM1/COM2
JCOM2: COM3/COM4 Serial COM Ports
(JCOM1 supports RS232/RS422/RS485, JCOM2 supports RS232)
JD1 Speaker Header
JF1 Front Control Panel Header
JGP1 DIO Connector
JHDMI Back Panel HDMI Port
JIP1 * Inverter Power Header
JMD1 M.2 Slot (B-KEY) (supports PCIe Gen2 X1/SATA / USB 2.0)
JMP1 Mini PCI-E Slot (supports PCIe Gen2 X1/USB 2.0)
JPH1* SATA Power Connector (for one HDD system)
JPW1 4-pin 12V-Standby R/A Type Power Connector
JSMBUS1 System Management Bus Header
JTPM1 Trusted Platform Module/Port 80 Connector (for debugging only)
LAN1 ~ LAN2 LAN (RJ45) Ports
LVDS1 * Dual Channel 48-bit LVDS Connector *
USB4/5 Back Panel Universal Serial Bus (USB) 3.0 Ports
USB0/1, USB2/3 USB 2.0 Headers
USB6 USB 3.1 Type-C Header
VGA Back Panel VGA Port
Figure 1-4. System Block Diagram
Note: This is a general block diagram and may not exactly represent the features on your
motherboard. See the System Specifications appendix for the actual specifications of your
motherboard.
System Block Diagram
USB 3.0
Intel
DDR3L non ECC SKU
DUAL CHANNEL
MAX. 8G SO-DIMM SUPPORTED
DDR3L 1866 MHz
Non-ECC-SODIMM0
DDI0
HDMI connector
SATA[1]
USB 3.0 [0]
SPI FLASH
SPI 128Mb
FST_SPI
USB 2.0 [0]
High Definition
REALTEK
ALC888S-VD2-GR
FRONT AUDIO Header
I/O PANEL LAYOUT
USB 3.0
M.2 SLOT (B KEY)
USB 3.0 [1]
Rear USB3.0 connector (USB 0)
Rear USB3.0 connector (USB 1)
5.0Gb/s
5.0Gb/s
USB 2.0 [1]
DDI1
SATA
6Gb/s
MUX
USB 2.0 [2]
USB 2.0 [7]
USB 2.0 [3]
USB 2.0 [4]
USB 2.0 [5]
480Mb/s
480Mb/s
LPC
SIO
Port 80 / Debug header
NCT6106D
Audio
SATA 6Gb/s
I-SATA0
SATA[0]
eDP
VGA
Rear USB2.0 Header (USB 3)
Rear USB2.0 Header (USB 2)
CH7517
DP to VGA Bridge
VGA Connector
PTN3460
DP to LVDSBridge
LVDS Connector
480Mb/s
480Mb/s
Front USB2.0 Header (USB 4)
Front USB2.0 Header (USB 5)
COM 3 / 4 (RS232)
PCIe Gen2 x 1
5.0GT/s
PCIE[0]
GLAN1
INTEL I210
PCIe Gen2 x 1
5.0GT/s
PCIE[2]
RJ45
GLAN2
INTEL I210
RJ45
PCIe Gen2 x 1
PCIE[1]
5.0GT/s
PCIe Gen2 x 1
5.0GT/s
PCIE[3]
Mini-PCIe Slot
PCIe Gen2 x 2
5.0GT/s x2
PCIE[4/5]
ASM1142
PCIe Gen2 X2 to USB3.1
TYPE C
480Mb/s
LAN 1
2 1
TYPE C
USB 3.1
HDMI
LAN 2
COM 1 /2 (RS232/RS422/RS485)
Note: Connectors marked with an asterisk " * " are unused or unaccessible by the system and
cannot be used.