Supermicro C7Z270-CG-M, Руководство пользователя

Страница: 116 / 147

4-46
Supermicro C7Z270-CG-M Motherboard User’s Manual
SATA Controllers
Select Disabled to disable the onboard SATA Controllers. The settings
are
Enabled and Disabled.
SATA Mode Selection
This item selects the mode for the installed SATA drives. The options are
AHCI and Intel RST Premium.
SATA Controller Speed
Use this option to specify the maximum speed the SATA controller can
support. The options are
Default , Gen 1, Gen 2, and Gen 3.
SATA Frozen
Select Disabled to disable the Freeze Lock Security feature. The settings
are
Enabled and Disabled.
The remaining options in the section are similar across Serial ATA
Ports 0 through 5.
Serial ATA Port 0~5
This item dispays the detected SATA drive, if any.
Hot Plug
This feature designates the port specified for hot plugging. Set this item
to Enabled for hot-plugging support, which will allow the user to replace
a SATA disk drive without shutting down the system. The options are
Enabled and Disabled .
Configured as eSATA
This item dispays the eSATA status for the detected hard drive.
Spin Up Device
When this option is disabled, all drives will spin up at boot. When this
option is enabled, it will perform Staggered Spin Up on any drive this
option is activated. The settings are Enabled and
Disabled .
SATA Device Type
Use this feature to identify the type of HDD that is connected to the STATA
port. The options are Hard Disk Drive and Solid State Drive.