Super B2SD2(1)-8C/12C/16C-TF MicroBlade Module User's Manual
64
Serial Port 2 Configuration
Serial Port 2
Select Enabled to enable the onboard serial port specified by the user. The options are
Enabled
and Disabled. Enable this feature for the next two features to display and only
the Change Settings feature is available for configuration.
Device Settings
This feature displays the base I/O port address and the Interrupt Request address of a
serial port specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of Serial
Port 1. Select
Auto
for the BIOS to automatically assign the base I/O and IRQ address
to a serial port specified. The options are
Auto
, (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3),
(IO=3E8h; IRQ=3), and (IO=2E8h; IRQ=3).
Serial Port Console Redirection
COM1
Console Redirection
Select Enabled to enable COM Port 1 for Console Redirection, which will allow a client
machine to be connected to a host machine at a remote site for networking. The options are
Disabled
and Enabled.
*If the feature above is set to Enabled, the following features will become available for
configuration:
Console Redirection Settings
Terminal Type
This feature allows you to select the target terminal emulation type for Console Redirection.
Select VT100 to use the ASCII Character set. Select VT100+ to add color and function
key support. Select ANSI to use the Extended ASCII Character Set. Select VT-UTF8 to
use UTF8 encoding to map Unicode characters into one or more bytes. The options are
VT100,
VT100+
, VT-UTF8, and ANSI.
Содержание B2SD1-8C-TF
Страница 1: ...USER MANUAL Revision 1 0 B2SD2 8C TF B2SD2 12C TF B2SD2 16C TF B2SD1 8C TF...
Страница 9: ...9 Chapter 1 Introduction Figure 1 1 B2SD2 8C 12C 16C TF Motherboard Image...
Страница 10: ...10 Super B2SD2 1 8C 12C 16C TF Microblade Module User s Manual Figure 1 2 B2SD1 8C TF Motherboard Image...
