manualshive.com logo in svg

Supermicro AS -5019D-FTN4, Руководство пользователя, Страница: 51 / 113

Поделиться
Скачать
Supermicro AS -5019D-FTN4 Скачать руководство пользователя страница 51

Chapter 6: BIOS

51

System Date/System Time 

Use this option to change the system date and time. Highlight 

System Date 

or 

System Time 

using the arrow keys. Enter new values using the keyboard. Press the <Tab> key or the arrow 

keys to move between fields. The date must be entered in MM/DD/YYYY format. The time 

is entered in HH:MM:SS format. 

Note: 

The time is in the 24-hour format. For example, 5:30 P.M. appears as 17:30:00. The 

date's default value is 01/01/2016 after RTC reset.

Supermicro M11SDV-8C-LN4F 

BIOS Version

This feature displays the version of the BIOS ROM used in the system.

Build Date (of the BIOS)

This feature displays the date when the version of the BIOS ROM used in the system was built.

CPLD (Complex Programmable Logic Device) Version

This feature displays the CPLD version used in the system.

Memory Information

Total Memory (for the system)

This feature displays the total size of memory available in the system.

Содержание AS -5019D-FTN4


















































































































Отзывы:

Нет отзывов