10
A+ Server AS -2114GT-DPNR User's Manual
Figure 1-1. Control Panel (per node)
1.4 Chassis Features
Control Panel
Power switches and status LEDs are located on the control panel on the front of the chassis.
1
3
2
Control Panel Features (per node)
Item
Feature
Description
1
Power button
The main power switch applies or removes primary power from the power supply
to the server but maintains standby power. To perform most maintenance tasks,
unplug the rear power cables completely from the system and wait 30 seconds for
capacitors to discharge.
2
Information LED Alerts operator to several states, as noted in the table below.
3
UID button/LED
(Node A)
The unit identification (UID) button turns on or off the blue light function of the
Information LED.
Information LED
Status
Description
Continuously on and
red
An overheat condition has occurred.
(This may be caused by cable congestion.)
Blinking red (1Hz)
Fan failure, check for an inoperative fan.
Blinking red (0.25Hz)
Power failure, check for a non-operational power supply.
Solid blue
UID has been activated locally to locate the server in a
rack environment.
Blinking blue
UID has been activated using IPMI to locate the server in
a rack environment.
