Supermicro AOC-SIMLP-B, Руководство пользователя

Страница: 55 / 68

3-41
Chapter 3: Software Application and Usage
Table 3-23. Event Log Screen Controls
Item Name Description
1 Event Log Targets
This section allows you to manually set event log targets and
settings.
2 List Logging Enabled
Checking this box activates the event-logging list. To show the event
log list, click on the E
VENT
L
OG
menu option from the M
AINTENANCE
menu.
NOTE: The maximum number of log list entries is 1,000 events.
Every entry that exceeds this limit automatically overrides the oldest
one in the list. If the R
ESET
button is pressed, all logging information
is saved; however, all logging data is also lost if a hard reset is
performed or the system loses power.
3
Entries Shown Per
Page Enter the number of entries you want to display on a page into this
field.
4 Clear Button Click this button to clear the internal event log from the memory.
5 NFS Logging Enable
Checking this box enables NFS Logging, which creates a Network
File System (NFS) for the event logging data.
6 NFS Server Enter the IP Address of the NFS Server into this field.
7 NFS Share
Enter the path of the Network File System in which the event logging
data is stored into this field.
8 NFS Log File
Enter the filename of the Network File System in which the event
logging data is stored into this field.
9
SMTP Logging
Enable Checking this box enables SMTP (Simple Mail Transfer Protocol)
logging.
10 SMTP Server Enter the IP Address for the SMTP Server into this field.
11
Receiver Email
Address Enter the email address into this field that the SMTP event logging
data is sent.
12
Sender Email
Address Enter the email address from which the SMTP event logging data is
sent into this field.
13
SNMP Logging
Enable Checking this box enables SNMP (Simple Network Management
Protocol) logging.
14 Destination IP Enter the IP address where the SNMP trap is sent into this field.
15 Community
Enter in this field the name of the community if the receiver requires
a community string.
16
Event Log
Assignments
This section allows you to specify the types and the destination for
event logging. For each event listed in this section, check the box
next to it if you want to list it for your event log.
17 Apply Button
Click on this button to apply your selections from this screen to the
system.
18
Reset to Defaults
Button You can cancel your selections and switch back to the default values
by clicking on this button.