Supermicro 8U SuperBlade, Руководство пользователя

Страница: 60 / 74

8U SuperBlade User’s Manual
4-12
Reset Button
The Reset button located on the front of the CMM module is used to reset the following
software settings to their defaults:
To reset the CMM to factory defaults, press and hold the Reset button for five seconds.
Firmware
The firmware for the CMM switch resides in the module. This firmware can be updated
with the web-based management utility.
Within the utility, go to the M
AINTENANCE
> U
PDATE
F
IRMWARE
screen in the Web-based
Management Utility. Here you can enter the name of the firmware you want to update or
click on B
ROWSE
to select the firmware file. Finish by clicking the U
PLOAD
button.
NOTE: This process is not reversible once the firmware is updated, so proceed with caution.
It might take a few minutes to complete this procedure.
Web-based Management Utility
System management may be performed with either of three software packages:
IPMIview , SMCIPMItool or a Web-based Management Utility . Any of these utilities are
designed to provide an administrator with a comprehensive set of functions and
monitored data to keep tabs on the system and perform management activities.
The Web-based Management Utility is a web-based interface that consolidates and
simplifies system management for Supermicro 8U SuperBlade systems. The
Web-based Management Utility aggregates and displays data from the CMM module.
The Web-based Management Utility provides the following key management features:
• Enables IT administrators to view in-depth hardware configuration and status
information using a single intuitive interface.
• Provides an OS-independent, remote graphical console.
• Allows remote users to map local media (floppy, removable disks and hard drives)
or ISO images on a shared network drive to a blade server.
Table 4-6. CMM Reset Settings
Software Setting Default
User Name and Password Reset to ADMIN and ADMIN (case sensitive)
IP Address Reset to https://192.168.100.100
Gateway Address Reset to 0.0.0.0
Subnet Mask Reset to 255.255.255.0