Supermicro 8048B-TR4FT, Руководство пользователя

Страница: 113 / 135

7-20
SUPERSERVER 8048B-TR4FT USER'S MANUAL

Software Feature Mask Confi guration
Low Power Device Detection Support
Select Enabled for the low-power device to be detected by the BIOS. The options
are E nabled and Disabled .
Aggressive LPM Support
Select Enabled for the PCH chip to aggressively enter the Link-Power state. The
options are Enabled and Disabled.
Alternate ID (Available when RAID is selected in the item above-"Confi gure
SATA as")
Select Enabled for the port specifi ed by the user to report an alternate ID to the
system. The options are Enabled and Disabled.
SATA Port 0/SATA Port 1/SATA Port 2/SATA Port 3/SATA Port 4/SATA Port 5
This section allows the user to confi gure the following settings for the SATA port
specifi ed by the user.
Software Preserve
Port 0/Port 1/Port 2/Port 3/Port 4/Port 5
Select Enabled to enable the port specifi ed by the user. The options are Enabled
and Disabled.
Hot Plug (Available when AHCI or RAID is selected in the item above-
"Confi gure SATA as")
Select Enabled to support Hot-plugging for the selected SATA port which will
allow the user to replace a device without shutting down the system. The options
are Enabled and Disabled.
Port Multiplier (Available when AHCI or RAID is selected in the item above-
"Confi gure SATA as")
Select Enabled to support port-multiplier for the SATA port specifi ed by the user.
The options are Enabled and Disabled.
Spin Up Device (Available when AHCI or RAID is selected in the item
above-"Confi gure SATA as")
Select Enabled to allow the PCH to start a COMRESET initialization (from 0
to 1 on an edge detect) to the device. The options are Enabled and Disabled .