Supermicro 8015C-T, Руководство пользователя

Страница: 53 / 118

Chapter 5: Advanced Serverboard Setup
5-21
I
2
C to PCI-X/PCI-E Slots
Jumper Settings (J10/J11)
Jumper Setting Defi nition
J10: Closed J11:Closed Enabled
J10: Open J11: Open Disabled
I
2
C Bus to PCI-X/PCI-Exp. Slots
Jumpers J10 and J11 allow you to con-
nect the System Management Bus (I
2
C)
to PCI-X/PCI-E slots 3/4/5/6. The default
setting is Open (Disabled.) Both jumpers
must be set to the same setting See the
table on the right for jumper settings.
SATA Enable/Disable
Jumper Settings (JPS1)
Jumper Setting Defi nition
Pins 1-2 SATA Enabled (Default)
Pins 2-3 SATA Disabled
SATA Enable/Disable
JPS1 allows you to enable or disable the
SATA ports. The default position is on
pins 1 and 2 to enable. See the table on
the right for jumper settings.
TPM
Jumper Settings (J14)
Jumper Setting Defi nition
Closed Enabled (Default)
Open Disabled
TPM
Jumper J14 allows you to enable TPM
(Trusted Platform Module) if a proces-
sors that supports TPM is used in the
system. The default setting is Closed to
enable TPM. See the table on the right
for jumper settings. Note: You must en-
able TPM Support in the BIOS to use
this feature.
CPU PWR Select
Jumper Settings (JP5)
Jumper Setting Defi nition
Open 150W for 2U Platform (Default)
Closed 90W for 1U Platform
CPU Power Select
JP5 allows you to select the CPU power
settings. The default position is "Open"
to support 150 W for 2U systems.
See the table on the right for jumper
settings.
SATA RAID Mode
Jumper Settings (JPS2)
Jumper Setting Defi nition
Pins 1-2 SATA Enabled (Default)
Pins 2-3 SAS Enabled
SATA RAID Mode
JPS2 allows you to switch between the
two RAID modes available: MegaRAID
and Integrated RAID (the latter requires
you to refresh the fi rmware). See the
table on the right for jumper settings.