Supermicro 7048R-C1R, Руководство пользователя

Страница: 45 / 79

Chapter 6: Advanced Chassis Setup
6-3 6-2
S
UPER
S
ERVER 7048R-C1RT/7048R-C1R User's Manual
Figure 6-1. Chassis Front View
System Reset Main Power
6-2 Front Control Panel
The front control panel must be connected to the JF1 connector on the serverboard
to provide you with system status and alarm indications. A ribbon cable has bundled
these wires together to simplify this connection. Connect the cable from JF1 on the
serverboard (making sure the red wire plugs into pin 1) to the appropriate comnnec-
tor on the front control panel PCB (printed circuit board). Pull all excess cabling over
to the control panel side of the chassis. The LEDs on the control panel inform you
of system status -See Figure 6-2 for details. See Chapter 5 for details on JF1.
Figure 6-2. Front Control Panel LEDs
Power
NIC1
HDD
Power Fail
Overheat/Fan Fail
Indicates power is being supplied to the system.
Indicates network activity on LAN port 1.
Indicates hard drive activity when flashing.
Indicates a power supply failure. This LED is functional
only when two power supply modules are installed in the
system.
This LED will be solid blue when the UID function has
been activated. When flashing red it indicates a fan failure
and when solid red it indicates an overheat condition (see
Chapter 3 for details).
One 5.25" Drive Bay
USB Ports
Mobile Rack for Eight
2.5" Hard Drives
NIC2 Indicates network activity on LAN port 2
2
1
Eight 3.5" Hard Drive
Bays (behind locking
bezel)