Supermicro 7045B-T, Руководство пользователя

Страница: 51 / 120

Chapter 5: Advanced Serverboard Setup
5-17
Wake-On-LAN
The Wake-On-LAN header is desig-
nated JWOL. See the table on the
right for pin defi nitions. You must
enable the LAN Wake-Up setting in
BIOS to use this feature. You must
also have a LAN card with a Wake-
on-LAN connector and cable.
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR. This function allows
your computer to receive and "wake-
up" by an incoming call to the modem
when in suspend state. See the table
on the right for pin defi nitions. You
must have a WOR card and cable to
use this feature.
SMB
The System Management Bus header
(for the PCI bus) designated J17 is
located near the battery. Connect the
appropriate cable here to utilize SMB
on your system. See the table on the
right for pin defi nitions.
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin# Defi nition
1 Ground (Black)
2 Wake-up
Wake-On-LAN
Pin Defi nitions
(JWOL)
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up
SMB Power (I 2 C)
The header at J18 is for I2C, which
may be used to monitor the status of
the power supply. See the table on the
right for pin defi nitions.
SMB Header
Pin Defi nitions (J17)
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 No Connection
SMB Power (I 2 C)
Pin Defi nitions (J18)
Pin# Defi nition
1 Clock
2 SMB Data
3 N/A
4 N/A
5 N/A