Supermicro 6038R-DE2CR16L, Руководство пользователя

Страница: 64 / 72

Chapter 7: BIOS
7-37 7-36
S
UPER
S
TORAGE
S
YSTEM 6038R-DE2CR16L User's Manual
7-6 Security Settings
This submenu allows the user to configure the following security settings for the
system.
Password Check
Select Setup for the system to prompt for a password upon entering the BIOS setup
utility. Select Always for the system to prompt for a password at bootup and upon
entering the BIOS Setup utility. The options are
Setup and Always.
Administrator Password
Use this feature to set the administrator password which is required before entering
the BIOS setup utility. The length of the password should be from 3 characters
to 20 characters long.
User Password (Available after an Administrator Password is entered)
Use this feature to set the user password which is required to enter the BIOS
setup utility. The length of the password should be from 3 characters to 20 char-
acters long.

Secure Boot Menu
The following items will display:
•
System Mode
•
Secure Boot
Secure Boot
Select Enable for secure boot support to ensure system security at bootup. The
options are
Disabled
and Enabled.
Secure Boot Mode
This feature allows the user to select the desired secure boot mode for the system.
The options are Standard and
Custom .
CSM Support
Select Enabled to enable CSM support to enhance system security. The options
are Disabled and
Enabled .

Key Management
Default Key Provision
Select Enable to install all manufacture defaults for the following system security
settings. The options are
Disabled and Enabled.

Enroll All Factory Default Keys
This feature allows the user to store security-related boot data in a file of the same
named in the system root folder of your computer.

Save All Secure Boot Variables
This feature allows the user to save the secure boot settings specified by the user.
Platform Key
 Delete PK
Select <Yes> to confirm deletion of the Platform Key (PK) from the NVRAM (Non-
Volatile RAM).
 Set New PK (Key)
Select <Yes> to load the manufacture_default platform keys for your system. Select
No to load the default settings from other sources.
Key Exchange Key (KEK)

Delete KEK (Key Exchange Key)
Select <Yes> to confirm deletion of the KEK from the NVRAM (Non-Volatile RAM).

Set New KEK (Key Exchange Key)
Select <Yes> to confirm that a new KEK will be set in the NVRAM (Non-Volatile
RAM).

Append KEK (Key Exchange Key)
Select <Yes> to load the new KEK from the manufacture defaults. Select <No> to
load the new KEK from other sources.