Supermicro 6027AX-72RF-HFT1, Руководство пользователя

Страница: 71 / 126

Chapter 5: Advanced Serverboard Setup
5-25
VGA Enable
Jumper JPG1 allows the user to enable
the onboard VGA connector. The default
setting is Pins 1-2 to enable the con-
nection. See the table on the right for
jumper settings.
VGA Enable
Jumper Settings
Jumper Setting De fi nition
Pins 1-2
Enabled (Default)
Pins 2-3
Disabled
BMC Enable
Jumper JPB1 allows you to enable the
embedded WPCM 450 BMC (Baseboard
Management) Controller to provide IPMI
2.0/KVM support on the motherboard.
See the table on the right for jumper
settings.
BMC Enable
Jumper Settings
Jumper Setting De fi nition
Pins 1-2 BMC Enable
(Default)
Pins 2-3 Normal
I 2 C Bus to PCI-Exp. Slots
Use Jumpers JI
2
C1 and JI
2
C2 to connect
the System Management Bus (I
2
C) to
PCI-Express slots to improve PCI slot
performance. These two jumpers are
to be set at the same time. The default
setting is Closed to enable the con-
nections. See the table on the right for
jumper settings.
I
2
C to PCI-E slots
Jumper Settings
Jumper Setting De fi nition
Closed Enabled (Default)
Open Disabled
SAS Enable (X9DAX-7F/7TF Only)
Jumper JPS1 allows you to enable the
LSI SAS 2208 Controller to provide SAS
2.0 support on the motherboard. See the
table on the right for jumper settings.
SAS Enable
Jumper Settings
Jumper Setting De fi nition
Pins 1-2 BMC Enable
(Default)
Pins 2-3 Normal