Supermicro 6027AX-72RF-HFT1, Руководство пользователя

Страница: 64 / 126

5-18
S
UPER
S
ERVER 6027AX-72RF/TRF-HFT1/HFT2/HFT3 User's Manual
Fan Headers
There are eight fan headers on the
serverboard, all of which are 4-pin
fans (Fan 1-Fan 8). Pins 1-3 of the
fan headers are backward compatible
with the traditional 3-pin fans. (Fan
speed control is supported with 4-pin
fans only.) See the table on the right
for pin de
fi nitions. The onboard fan
speeds are controlled by IPMI.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. See the table on the right for
pin de
fi nitions.
NMI Button
Pin Defi nitions (JF1)
Pin# De fi nition
19 Control
20 Ground
Fan Header
Pin Defi nitions
Pin# De fi nition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWR Modulation
Power On LED
The Power On LED connector is lo-
cated on pins 15 and 16 of JF1 (use
JLED for a 3-pin connector). This
connection is used to provide LED
indication of power being supplied to
the system. See the table on the right
for pin de
fi nitions.
Power LED
Pin Defi nitions (JF1)
Pin# De fi nition
15 5V Stby
16 Control
Serial Port Pin Defi nitions
(COM1/COM2)
Pin # De fi nition Pin # De fi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 N/A
Chassis Intrusion
The Chassis Intrusion header is des-
ignated JL1. Attach a chassis intrusion
cable from the chassis to inform you of
a chassis intrusion when the chassis
is opened
Chassis Intrusion
Pin Defi nitions
Pin# De fi nition
1 Intrusion Input
2 Ground
Serial Ports
A serial port (JCOM2) is located
close to CPU1 Slot1 (PCI-E 3.0x16)
on the motherboard. This connection
provides serial connection support.
See the table on the right for pin
de
fi nitions.