Supermicro 6027AX-72RF-HFT1, Руководство пользователя

Страница: 63 / 126

Chapter 5: Advanced Serverboard Setup
5-17
Overheat (OH)/Fan Fail/PWR Fail/
UID LED
Connect an LED cable to pins 7 and
8 of Front Control Panel to use the
Overheat/Fan Fail/Power Fail and
UID LED connections. The Red LED
on pin 7 provides warnings of over-
heat, fan failure or power failure. The
Blue LED on pin 8 works as the front
panel UID LED indicator. The Red
LED takes precedence over the Blue
LED by default. Refer to the table on
the right for pin de
fi nitions.
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. Attach a
cable here to indicate HDD activ-
ity.See the table on the right for pin
de
fi nitions.
NIC2 LED
Pin Defi nitions (JF1)
Pin# De fi nition
9 NIC 2 Activity LED
10 NIC 2 Link LED
HDD LED
Pin Defi nitions (JF1)
Pin# De fi nition
13 3.3V Standby
14 HD Active
NIC2 LED
The LED connections for LAN2 are
on pins 9 and 10 of JF1. Attach an
LED cable to display network activ-
ity. See the table on the right for pin
de
fi nitions.
NIC1 LED
Pin Defi nitions (JF1)
Pin# De fi nition
11 NIC 1 Activity LED
12 NIC 1 Link LED
NIC1 LED
The LED connections for LAN1 are
on pins 11 and 12 of JF1. Attach an
LED cable to display network activ-
ity. See the table on the right for pin
de
fi nitions.
OH/Fan Fail Indicator Status
State De fi nition
Off Normal
On Overheat
Flashing Fan Fail
Power Fail LED
The Power Fail LED connection is lo-
cated on pins 5 and 6 of JF1. See the
table on the right for pin de
fi nitions.
PWR Fail LED
Pin Defi nitions (JF1)
Pin# De fi nition
5 3.3V
6 PWR Supply Fail
OH/Fan Fail/ PWR Fail/Blue_
UID LED Pin Defi nitions (JF1)
Pin# De fi nition
7 Vcc
8 OH/Fan Fail LED