Supermicro 5038K-i, Руководство пользователя

Страница: 59 / 146

Chapter 5: Advanced Motherboard Setup
5-15
T-SGPIO 1/2/3 Headers
Three SGPIO (Serial Link General
Purpose Input/Output) headers are
located on the motherboard. These
SGPIO ports support onboard S-SATA
3.0 (S-SATA 1-4) and I-SATA 3.0 ports
(I-SATA 1-3). See the table on the right
for pin defi nitions.
T-SGPIO Header
Pin Defi nitions (SGPIO1/2/3)
Pin# Defi nition Pin Defi nition
2 NC 1 NC
4 Ground 3 Data
6 Load 5 Ground
8 Clock 7 NC
Note: NC=No Connection
DOM Power Connectors
Two power connectors for SATA DOM
(Disk_On_Module) devices are located
at JSD1/JSD2. Connect appropriate
cables here to provide power support
for your Serial Link DOM devices.
DOM PWR
Pin Defi nitions (JSD1/2)
Pin# Defi nition
1 +5V
2 Ground
3 Ground
Standby Power Header
The P5V (+5V) Standby Power
header is located at JSTBY1 on the
motherboard. See the table on the right
for pin defi nitions. (You must also have
a card with a standby power connector
and a cable to use this feature.)
Standby PWR
Pin Defi nitions (JSTBY1)
Pin# Defi nition
1 +5V Standby
2 Ground
3 No Connection
Power LED/Speaker
On the JD1 header, pins 1-3 are used
for power LED indication, and pins 4-7
are for the speaker. See the tables on
the right for pin defi nitions. Please note
that the speaker connector pins (4-7)
are for use with an external speaker. If
you wish to use the onboard speaker,
close pins 6-7 with a cap.
PWR LED Connector
Pin Defi nitions (JD1)
Pin Setting Defi nition
Pin 1 Anode (+)
Pin 2 Cathode (-)
Pin 3 NA
Speaker Connector
Pin Settings
Pin Setting Defi nition
Pins 4-7 External Speaker
Pins 6-7 Internal Speaker