Supermicro 5038K-i, Руководство пользователя

Страница: 137 / 146

Appendix A: POST Error Beep Codes
A-1
Appendix A
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue with
bootup. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue to bootup. If a fatal error occurs,
you should consult with your system manufacturer for possible repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the
corresponding error.
BIOS Error Beep Codes
Beep Code/LED Error Message Description
1 beep Refresh Circuits have been reset. (Ready to
power up)
5 short beeps + 1 long beep Memory error No memory detected in the system
5 long beeps + 2 short beeps Display memory read/
write error Video adapter missing or with faulty
memory
1 continuous beep System OH System overheat